NMS-SD3-AM180X
  • NMS-SD3-AM180X
  • NMS-SD3-AM180X

NMS-SD3-AM180X

System on Module NMS-SDM-AM180X is based of one of the TI processors: OMAP-l138, OMAP-l132, AM1810, AM1808, AM1806. The module has  up to 256 MB RAM and  up to  512 MB FLASH.

Key feature

  • Form-factor SODIMM 204 (68x30 mm)
  • Processors TI Sitara ARM AM1808/AM1806/AM1802/AM1810/ or C6000 DSP+ARM: OMAP-L138/OMAP-L132
  • DDR2-150MHz 64MB/128MB/256MB
  • 10/100 Base-T Ethernet (requires PHY on the board)
  • SATA interface
  • PWM
  • DSP processor(OMAP only)
  • RTC
NMS-SD3-AM180X

Usage

The NMS-SDM-AM180X in the SODIMM form factor based on Texas Instruments processors can be used in portable devices  and embedded systems thanks to a small size, a wide range of communication interfaces. DSP processor allow the use of modules in real-time systems.

Technical specifications

Mechanical Specifications

Form factor

SODIMM 204 EDGE

Dimensions

68х30 mm

Platform

CPU

Texas Instruments Sitara ARM microprocessors: AM1808/AM1806/AM1802/AM1810

Frequency

300MHz - 356MHz

CPU

Texas Instruments C6000 DSP+ARM Processor: OMAP-L138/OMAP-L132

Frequency

200 MHz - 456 MHz

RAM

Type

DDR2

Frequency

150 MHz

Capacity

64/128/256 MB

FLASH

Type

NAND

Capacity

128 MB/256 MB/512 MB/1 GB

Bootable memory

Capacity

256 byte

Interface

I2C, Unique ID

Audio

Interface

AC97

Input/output

I2C

2

EMAC

RMII/MII interface

SATA

1.5Gbps, 3.0Gbps

MMC/SD

2

SPI

2

USB

Full-speed host, USB OTG

UART

3

PWM

2

eCAP

3

HPI

1, 16 bit interface

McBSP

2

McASP

1

Power

Voltage

TBD

Power Consumption, max.

TBD

Power Consumption, max.

TBD

Conditions

Operating temperature

-40º – +85 ºC

Storage temperature

-40 º – +85 ºC

Operating humidity

Not more than 95% at 40 ° C

Storage humidity

Not more than 95% at 40 ° C

INMYS WIKI

NMS-SD3-AM180X-V1

Block diagram

Processor

The microprocessors have a physical USB OTG interface, USB HOST (Full-Speed), Ethernet MAC (except AM1806) with the ability to connect to PHY via MII and RMII interfaces, are able to work with a video camera, RTC, with audio (AC97) — all this makes it possible to use them for the construction of industrial and household automation, measuring equipment, portable data access terminals, single-board computers, digital signage, etc.

TI-OMAP/Sitara CPU

Ordering information

ordering information

NMS-SD3-AM180X

Data sheet

CPU manufacturer
Texas Instruments
CPU
TI AM180x
Formfactor
SoDIMM DDR3

12 other products in the same category: