SOM module NMS-SDM-IMX8MINI in the SODIMM DDRE2 form-factor based on the NXP i.MX8M mini applications processor can be used in portable and mobile devices thanks to a powerful processor, a wide range of communication interfaces, high performance, moderate power consumption and small size. PCI Express bus allows you to use SOM for systems with the transfer of large amounts of data between devices. Dual LVDS and CSI allows you to connect a variety of LCD displays and sensors.
|
Mechanic |
Form factor |
SODIMM |
|
Size (LхH) |
67.6х33.5 mm |
|
|
Platfrom |
CPU |
NXP i.MX 8M Mini |
|
Frequency |
1.6 GHz |
|
|
Core |
4x ARM Cortex A53, 1x ARM Cortex-M4F |
|
|
L1-cache (instruction/data) |
32 KB/32 KB |
|
|
L2-cache |
512 KB |
|
|
Memory |
Type |
DDR4 |
|
Size |
4Gb |
|
|
ECC support |
No |
|
|
NOR Flash |
Size |
128 Mb |
|
Interface |
SPI |
|
|
EEPROM |
Size |
2 Kb |
|
Interface |
I2C |
|
|
Unique ID |
EUI-48 |
|
|
MMC |
Size |
8 GB |
|
Graphics |
3D acceleration |
GC NanoUltra |
|
2D acceleration |
GC320 |
|
|
Multimedia |
Supported codecs |
1080p60 H265,VP9 decoder, 1080p60 H264, |
|
Camera |
4-lane MIPI-CSI Interface |
|
|
Display |
4-lane MIPI-DSI Interface |
|
|
Ethernet |
10/100/1000 Mbit/s |
1x Internal |
|
10/100 Mbit/s |
1x Ti LAN9250 |
|
|
WI-FI |
IEEE 802.11 b/g/n |
|
|
I/O Interfaces |
PCIe |
1 |
|
USB OTG 2.0 |
2 |
|
|
JTAG |
1 |
|
|
SAI |
3 |
|
|
SD |
1 |
|
|
UART |
4 |
|
|
I2C |
4 |
|
|
LVDS |
1 |
|
|
MIPI CSI |
1 |
|
|
GPIO |
12 |
|
|
Connectors |
SODIMM |
1 |
|
Microcoaxial |
1 |
|
|
Power |
Voltage |
5V |
|
Power Consumption, max. |
5W |
|
|
Power Consumption, typ. |
Depends on the usage |
|
|
Temperature |
Operating Temperature |
0º – 70ºC |
|
Storage Temperature |
-40º – +85ºC |
|
|
Humidity |
Operating |
10 - 90% r. H. non cond |
|
Storage |
5 - 95% r. H. non cond. |
|
|
INMYS WIKI |
The board has a microcoaxial connector for an external antenna.
The i.MX 8M Mini is NXP’s first embedded multicore applications processor built using advanced 14LPC FinFET process technology, providing more speed and improved power efficiency. With commercial and industrial level qualification and backed by NXP’s product longevity program, the i.MX 8M Mini family may be used in any general purpose industrial and IoT application.
Data sheet
12 other products in the same category:
Usage Due to the large number of logic elements, the module can be used in DSP blocks, industrial automation. Rich set of interfaces allows you...
Usage The NMS-SM-RK3568 processor module is based on 64-bit processor RK3568, which is configured with dual-core GPU and high-performance NPU,...
Usage Supporting the 1 GHz Sitara™ AM335x ARM Cortex-A8 processor from Texas Instruments (TI) with a rich 2D/3D graphics accelerator. The...
Usage NMS-uQ7-IMX8M in the Qseven form-factor based on the NXP i.MX8M applications processor can be used in portable and mobile devices thanks...
Usage The NMS-SDM-IMX6ULL is aimed for data collecting systems through various peripheral interfaces with further transmission over Ethernet...
Purpose The NMS-CS-IMX8MINI module has a powerful processor, GPU and video decoders, it has moderate power consumption, heat dissipation and small...
Usage System on Module NMS-UQ7-IMX8MM in the Qseven form-factor based on the NXP i.MX8M mini applications processor can be used in portable and...
Usage The NMS-NV-RK3568 processor module is based on 64-bit processor RK3568, which is configured with dual-core GPU and high-performance NPU,...
Usage The NMS-SDM-AM180X in the SODIMM form factor based on Texas Instruments processors can be used in portable devices and embedded systems...
Usage NMS-uQ7-BKLT is a System On Module, based on Baikal T1000 processor, come in useful in systems that require a wide range of communication...
Usage The NMS-SM-RK3568 processor module is based on 64-bit processor RK3588, which is configured with dual-core GPU and high-performance NPU,...
Usage The SOM module NMS-CM3-RK3328 is based on the Rockchip RK3328 processor - a low-power high-performance 4-core processor with a frequency of...
