NMS-SDM-IMX6ULL
  • NMS-SDM-IMX6ULL
  • NMS-SDM-IMX6ULL

NMS-SDM-IMX6ULL

The NMS-SDM-IMX6ULL module is based on NXP i.MX.6ULL operates at frequencies up to 800MHz.

Module can be equipped with up to 512GB of DDR3 RAM, and eMMC memory with total capacity up to 16GB.

Key features

  • SODIMM DDR2 (200 pins) form factor 
  • Industrial design 
  • low power consumption 
  • Two 100Mbit/s Ethernet ports. 
  • Two USB 2.0 ports with OTG support 
  • LCD display interface 
  • CSI interface for camera connection. 
  • 8 UART/RS232 ports 
  • Two CAN ports 
  • 4 SPI ports 
  • GPIO and SDIO interfaces. 
  • 10 channels ADC 
NMS-SDM-IMX6ULL

Usage

The NMS-SDM-IMX6ULL is aimed for data collecting systems through various peripheral interfaces with further transmission over Ethernet networks. Two Ethernet interfaces makes it possible, to use module as a router or a switch, easily integrated into the network infrastructure. Parallel in/out interfaces can be used for camera and display connection, combined with low power consumption and heat release, module can be used in portable devices (such as remote controllers, tablets, automated workstations). The presence of Linux for this module makes it easy to use open source software and an extensive user community for quick software adaptation.

Specifications

Mechanic

Form factor

SODIMM DDR2

Size (LхH)

67.6х33.2 mm

Platfrom

CPU

NXP i.MX 6ULL

Frequency

792MHz default / 800MHz max

Architecture

Arm Cortex-A7

Memory

Type

DDR3

Size

128/256/512 MB

EEPROM

Size

4 KB

eMMC

Size

4/8/16 GB

Multimedia

Display

1x TTL (24 bpp)

Camera

1x Parallel CSI

Camera

WXGA/HD (1366/768)

Ethernet

Controller

Internal

10/100 Mbit/s

2

I/O Interfaces

USB OTG 2.0

2

SD/SDIO/MMC interface

2

CAN

2x CAN 2.0B

GPIO

Yes

I2C

4

SPI/SSP

4

UART

8

Peripherals

ADC

2x 10ch

PWM

8

Others

JTAG

Muxed

RTC

Yes

Security Accelerators

Secure Boot

Tamper Protection

Yes

Connectors

SODIMM DDR2

1

pins

200

Power

Voltage

3.3V

Power Consumption, max.

0.763 W

Power Consumption, typ.

0.371 W

Temperature

Operating Temperature

-40º – +85ºC

Storage Temperature

-40º – +85ºC

Humidity

Operating

up to 95% at 40° C

Storage

up to 95% at 40° C

INMYS WIKI

NMS-SDM-IMX6ULL-V1

Function diagram

Processor

The i.MX 6ULL is a power efficient and cost-optimized applications processor family featuring an advanced implementation of a single Arm Cortex-A7 core, which operates at speeds up to 900 MHz. The i.MX 6ULL applications processor includes an integrated power management module that reduces the complexity of an external power supply and simplifies power sequencing. Each processor in this family provides various memory interfaces, including 16-bit LPDDR2, DDR3, DDR3L, raw and managed NAND flash, NOR flash, eMMC, Quad SPI and a wide range of other interfaces for connecting peripherals such as WLAN, Bluetooth®, GPS, displays and camera sensors.

i.MX 6ULL CPUs goes helpful in these spheres:

  • IoT gateways
  • Home consumption management systems
  • Intelligent information hubs
  • Intelligent production management systems
  • Portable medicine
  • Streaming audio devices
  • Printers and 2D scanners
  • Smart devices

NMS-SDM-IMX6ULL

Data sheet

CPU manufacturer
NXP
CPU
NXP i.MX 6ULL
CPU architecture
Arm Cortex-A7
Operating Temperature
-40° to +85° C
Formfactor
SoDimm DDR2

Download

Datasheet

Brief datasheet of NMS-SOM-IMX6ULL

Download (3.8M)

Diagram

Diagram of NMS-SOM-IMX6ULL

Download (29.82k)

12 other products in the same category: